|
PLEASE PRINT THIS PAGE. |
|
|
DO NOT use our supplied M10 stainless steel bolts in conjunction with any other accessory that also uses these mounting bolts. Our bolts are designed to hold the extenders and the STOCK foot peg mounting plates ONLY. If you intend to use the extenders in conjunction with other items such as an engine guard or highway bars you MUST USE longer bolts which we CANNOT supply! |
|
|
INSTALLING THESE EXTENDERS FOR THE OWNER OR RIDER OF THE MOTORCYCLE IF YOU ARE INSTALLING THESE EXTENDERS FOR THE OWNER AND/OR RIDER OF THIS MOTORCYCLE, IT IS IMPERATIVE THAT ONCE THE EXTENDERS HAVE BEEN INSTALLED YOU MUST PASS THIS WARNING NOTICE, THE INSTALLATION INSTRUCTION SHEET AND ANY OTHER NOTICES ENCLOSED WITH THE FOOT PEG EXTENDERS ALONG TO THE OWNER AND/OR RIDER. AS THE INSTALLER, IT IS YOUR RESPONSIBILITY TO MAKE SURE THEY HAVE READ AND FULLY UNDERSTAND THE CORRECT USE OF THE EXTENDERS ONCE THEY ARE INSTALLED. FAILURE TO DO SO MAY RESULT IN MISUSE BY THE OWNER AND/OR RIDER WHICH MAY RESULT IN AN INJURY OR DEATH THAT SHADOWSTUFF CANNOT AND WILL NOT BE HELD LIABLE FOR. YOU, AS THE INSTALLER, MUST ACCEPT THE FULL RESPONSIBILITY FOR ALERTING THE OWNER AND/OR RIDER TO THE CORRECT USE OF THESE EXTENDERS. |
|
|
WARNING!!
- WARNING!! |
|
|
If you cannot accept
this limitation to the installation and/or use of these foot peg
extenders then please email
AND PROVIDING you are the original purchaser AND they have not been
fitted to a motorcycle, we will organize a refund. |
|
|
SELLING THESE
EXTENDERS TO A THIRD PARTY |
|